Sharp

Turntable motor used in Sharp microwave / convection oven model listed below 120V, 2.3 / 2.7 rpm, 50 / 60hz, 2.3 / 2.8 W Metal 1/4" length shaft flat on two sides Replaces original Sharp part...

Replacement high voltage diode / rectifier as used in many microwave oven brands and models. Marked "HVR 1X - 8 " Manufacturer specs are 12KV, 500mA Each diode has a ring post ground and 1/4 inch...

Metal baking rack for Sharp brand combination microwave / convection ovens in the R820 series The diameter of the rack is approx 10 3/4 inches The rack is approx 2 inches high This rack replaces...

Replacement roller wheel / turntable support for Dacor Microwave Ovens listed below This turntable support replaces Dacor part # 86812 This roller assembly is used in the following Dacor microwave...

Metal baking rack for Sharp brand combination microwave / convection ovens. This is the 'high' rack - used to elevate foods during convection and combination cook cycles The diameter of the rack is...

High Metal baking rack for Sharp brand combination microwave / convection ovens in the R930 series listed below The diameter of the rack is approx 13 inches The rack is approx 4 1/2" inches...

High Metal baking rack for Sharp brand combination microwave / convection ovens in the SMC1585 series listed below The diameter of the rack is approx 11 1/2 inches The rack is approx 4 inches...

Metal baking rack for Sharp brand combination microwave / convection ovens. This is the 'Low' rack - used to elevate foods during convection and combination cook cycles The diameter of the rack is...

Low Metal baking rack for Sharp brand combination microwave / convection ovens in the R930 series listed below The diameter of the rack is approx 13 inches The rack is approx 2 inches high This...

Low Metal baking rack for Sharp brand combination microwave / convection ovens in the SMC1585 series listed below The diameter of the rack is approx 11 inches The rack is approx 2 inches high This...

Old stock Turntable motor used in Sharp microwave oven models listed below 120V, 60HZ 18W Manufactured by Ogihara Mfg Co. Ltd - Japan Been sitting in stock on a shelf for over 30 yrs! Original...

This is a Sharp brand replacement magnetron tube, type 2M240H(L) for Sharp microwave drawer unit models listed below Manufactured in Thailand - NOT a Chinese Knockoff! IMPORTANT NOTE :There are...